This will cause the FINE cartridge to dry out, and the printer may not operate properly when it is reinstalled. Once a FINE cartridge has been installed, do not remove it from the printer and leave it out in the open. Installing a used FINE cartridge may cause the nozzles to clog.įurthermore, with such a FINE cartridge, the printer will not be able to inform you when to replace the FINE cartridge properly. Use a new FINE cartridge for replacement. Do not leave the printer with the FINE cartridge removed. My husband and I moved several ourselves, and we're kinda wimpy.If you remove a FINE cartridge, replace it immediately. It will go smoothly, don't worry!! Once you remove all the loose items on the stove, it lightens up considerably. If you lose those, they will cost about $200 each to replace.ĭon't worry yourself too much about the move.

If you're moving the stove in an open trailer, you might want to remove the oven temp and timer knobs, too. Basically, the best rule is to remove anything that isn't screwed down. Remove that too so it doesn't bang around in the oven. You might want to consider removing the knobs for transportation, so if you do, you'll need the hex wrenches.īerlyn is right - remove the oven floor. But even it they do, it's no biggie to find replacements.īring the following tools with you: flat and phillips screwdrivers, pliers, a set of various-size wrenches, and a set of hex wrenches. But sometimes the legs require a pipewrench to get them broke loose, so sometimes it's not worth the effort, as long as you're careful to not drag them (they bend/break). I've had the back stove legs want to drag the ground when on a dolly, so I see the wisdom in that. Some people also recommend removing the stove legs for transporting the stove. The skirting just snaps onto the stove legs. Just lift those off the burner, and pull the burner out. You should see a tube-thing stuck into each burner. Burners: Remove the grates and the drip-pans. Pull it downward since it will be tucked into the overhang of the stovetop.Ģ. You just loosen those up and the panel will pull off. You can put your hand there and feel them. Side panels: on the bottom, underside of the panel are 2 bolts.

T3500 remove side panel